Did this article help you?
Posted: Wed Feb 19, 2025 4:01 am
Not really
If this method does not help, the problem is more serious. You can order microwave repair from our company, as well as get a full diagnostics. When conducting an inspection yourself, check the fuses. They tend to burn out and break when there is a voltage drop. There are two fuses in total, and both can affect the ability of the oven to turn on.
The first temperature sensor is located on the outside of the camera, the second is the network fuse. If a malfunction is detected, they must be replaced. If this does not help to revive the equipment, it is time belgium telegram data to move on to more radical measures.
The door has a latch microswitch that signals the door position: closed/open. If the switch is broken, the oven turns on, but does not start heating, the plate does not spin. The mechanism is simple: the control module thinks that the door is still open and waits for it to be closed.
Turns on and off automatically
This situation is quite rare, but it occurs to users. The fact is that the installed thermal relay constantly monitors the temperature of the device so that it does not exceed the maximum permissible, operating temperature. And when problems occur, the oven overheats, the thermal relay automatically turns it off. The problem is that the device itself takes a long time to cool down. Therefore, it has to be left for a long time.
To verify the "diagnosis", leave the microwave for 20-30 minutes, let it drop in temperature. Then try to turn it on again. If the problem disappears, then it's all about overheating and the thermal relay. When you touch the body, you can feel that it is excessively hot.
Overheating occurs due to a fan that is not working properly or is completely broken. The breakdown should be looked for in it.
If this method does not help, the problem is more serious. You can order microwave repair from our company, as well as get a full diagnostics. When conducting an inspection yourself, check the fuses. They tend to burn out and break when there is a voltage drop. There are two fuses in total, and both can affect the ability of the oven to turn on.
The first temperature sensor is located on the outside of the camera, the second is the network fuse. If a malfunction is detected, they must be replaced. If this does not help to revive the equipment, it is time belgium telegram data to move on to more radical measures.
The door has a latch microswitch that signals the door position: closed/open. If the switch is broken, the oven turns on, but does not start heating, the plate does not spin. The mechanism is simple: the control module thinks that the door is still open and waits for it to be closed.
Turns on and off automatically
This situation is quite rare, but it occurs to users. The fact is that the installed thermal relay constantly monitors the temperature of the device so that it does not exceed the maximum permissible, operating temperature. And when problems occur, the oven overheats, the thermal relay automatically turns it off. The problem is that the device itself takes a long time to cool down. Therefore, it has to be left for a long time.
To verify the "diagnosis", leave the microwave for 20-30 minutes, let it drop in temperature. Then try to turn it on again. If the problem disappears, then it's all about overheating and the thermal relay. When you touch the body, you can feel that it is excessively hot.
Overheating occurs due to a fan that is not working properly or is completely broken. The breakdown should be looked for in it.