How to use the combine
Posted: Thu Feb 13, 2025 4:09 am
Once all crop has been harvested, move the header clutch lever to the disengaged position.
When the grain outlet stops producing grain, move the threshing unit clutch lever to the disengaged position.
Check that all the switches on the car are closed. Reduce the throttle and turn off the engine.
Drive the combine back to its storage location and perform certain checks and maintenance.
4. How to service a combine harvester
4.1 Removing garbage
Thoroughly clean all machine components china number data and connections, paying particular attention to cleaning the puller and removing residue from the return plate.
Clean the return tray of the cleaning machine.
Clean any residue from the rollers and grates.
Be sure to clean the grain in the grain storage facility and elevators.
4.2 Full lubrication
Apply oil or petroleum jelly to each connection to prevent oxidation.
When the grain outlet stops producing grain, move the threshing unit clutch lever to the disengaged position.
Check that all the switches on the car are closed. Reduce the throttle and turn off the engine.
Drive the combine back to its storage location and perform certain checks and maintenance.
4. How to service a combine harvester
4.1 Removing garbage
Thoroughly clean all machine components china number data and connections, paying particular attention to cleaning the puller and removing residue from the return plate.
Clean the return tray of the cleaning machine.
Clean any residue from the rollers and grates.
Be sure to clean the grain in the grain storage facility and elevators.
4.2 Full lubrication
Apply oil or petroleum jelly to each connection to prevent oxidation.